Browse all practice questions for the Mammography Registry Practice Exam. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

Mammography Registry Practice Exam 2026 - Free Mammography Practice Questions and Study Guide course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • What does a diagnostic report in mammography summarize?
  • Digital breast tomosynthesis (DBT) finds what percentage more cancers than analog or 2D full-field digital mammograms (FFDM)?
  • Which hormone therapy is associated with an increased risk of breast cancer?
  • Which of the following are possible complications after a breast biopsy?
  • Screening mammography is primarily for which type of patient?
  • How often should QC testing be conducted according to established protocols?
  • Which of the following is NOT a reason for breast compression during mammography?
  • Which factor is NOT typically used to assess the stage of breast cancer?
  • What does DQE measure in terms of imaging systems?
  • What does a false positive result in mammography lead to?
  • Medical errors can happen when there are too many of what?
  • Does FDA approval of a new technology guarantee that the test is infallible?
  • What type of tool is DBT considered?
  • Which of the following is a desirable design feature of the C-arm on a mammography machine?
  • What is the BI-RADS classification for a normal mammogram?
  • What significant changes occurred in mammography between 1965 and 2015?
  • What does the presence of different QC procedures among manufacturers imply for QC testing?
  • What portion of the breast is excluded during the MLO projection?
  • What is an important consideration in positioning patients for mammograms?
  • What might a woman experience if she has a family history of breast cancer?
  • How can a technologist foster a cooperative partnership in mammography?
  • How does aging influence breast cancer risk?
  • What is the typical follow-up for a BI-RADS 3 classification?
  • The majority of women who have a breast biopsy performed are diagnosed with cancer.
  • Is hormone therapy appropriate for all women diagnosed with breast cancer?
  • What type of health information can enhance the effectiveness of mammography?
  • What indicates to the technologist that an exposure was technically adequate?
  • What is a challenge of performing handheld screening breast ultrasound exams for high-risk women?
  • Which of the following is NOT typically a factor influencing mammography sensitivity?
  • Which of the following statements is true regarding false-positive recalls in radiology?
  • Select the two coordinate systems used with SBB.
  • What role do radiologists play in the communication process regarding mammogram results?
  • How many days do MQSA regulations require to provide mammography exam results to the referring physician and patient?
  • What is the definition of "teleradiology"?
  • At what age are women generally recommended to begin annual mammography screenings?
  • Which additional treatment might be included in adjuvant therapy after primary surgery for breast cancer?
  • Which portion of the breast is excluded during the performance of the CC projection?
  • Which approach should be taken if a patient is nervous during their mammogram?
  • In mammography, why is accurate patient positioning critical?
  • What is a significant benefit of implementing a medical audit in a mammography facility?
  • What are some common signs that may indicate the need for a diagnostic mammogram?
  • If a lesion is located at 2 o'clock in the right breast, which lateral projection should be done?
  • What additional testing is often caused by a false positive in mammography?
  • How do mammograms affect breast cancer survival rates?
  • When imaging patients who require special assistance during the exam, is it necessary for the technologist to relay this information to the radiologist?
  • The purpose of the mammography machine sterilization is primarily for what?
  • How is breast cancer staging typically determined?
  • What does the term “breast density” refer to?
  • Is there only one type of breast cancer?
  • Which is/are indications to perform FNAC?
  • MQSA final rules dictate that the dose for a single view mammogram should measure no more than ______.
  • A patient presents with a lumpectomy scar and informs the technologist that her breast is sensitive from radiation therapy. What should the technologist not do?
  • What role does patient history play in mammography?
  • In Digital Breast Tomosynthesis (DBT), what type of images do radiologists use for interpretation?
  • If a new phantom is implemented without notifying the medical physicist, what might be a potential issue?
  • Which study investigated the efficacy of digital versus analog mammography?
  • What safety measure is essential when operating MRI machines?
  • The radiologist can electronically manipulate a digital image because it is what type of image?
  • A system that ensures the reliability, clarity, and accuracy of the interpretation of mammograms is established through what type of audit?
  • An XCCL is necessary additional view to add to a routine screening exam when ____________.
  • What is the primary function of the radiologist in the mammography process?
  • When comparing QC manuals from different manufacturers of mammography machines, which of the following statements is true?
  • What is essential for proper imaging technique in mammography?
  • Possible side effects after mastectomy surgery are:
  • Which of the following is not a benefit from using the 7.5-cm spot compression device with the spot compression technique?
  • What does the term "false positive" refer to in mammography?
  • Which factor mentioned influences the sensitivity of mammography?
  • The mammographer's dilemma is the lack of an equilibrium between:
  • How is the magnetic field of an MRI contained?
  • Which demographic shows a particularly increased risk of breast cancer due to obesity?
  • What technology is primarily used for digital mammograms?
  • Which is not a disability that requires the technologist to provide special assistance during the mammography examination?
  • There are two coordinate systems used with SBB. The _______________ coordinate system uses X-Y-Z, while the _______________ coordinate system utilizes H-V-D.
  • What is a common protocol for managing a patient with claustrophobia during an MRI?
  • How should patients prepare for a mammogram appointment?
  • How many categories are in the ACR BIRADS classification of breast density?
  • What options are available for individuals at high risk of developing breast cancer?
  • Which of the following is NOT a sign that may require further investigation in breast health?
  • Which clock times are the same in each breast?
  • Comparing current images to previous studies leads to what outcome?
  • Which of the following is not an indication for using ultrasound in conjunction with mammography?
  • Which condition is often recommended for MRI surveillance in high-risk populations?
  • The first mammogram a woman has is referred to as her ___________ exam.
  • Which examination is considered one of the most challenging for a radiologist to interpret?
  • What is the recommended follow-up for women with a history of lobular carcinoma in situ (LCIS)?
  • In the classification of breast density, "Heterogeneously dense" indicates what?
  • Digital mammography is significantly better at imaging women who are:
  • What benign breast condition is quite common in males?
  • Which type of magnet is most appropriate for use in breast MRI?
  • What differentiates a diagnostic ultrasound from a screening ultrasound?
  • What does MRI stand for?
  • What should the rationale for patient assignment in a facility with both 2D and 3D machines be based on?
  • What is the recommended action if a patient is tense during a mammogram?
  • What is the main role of stereotactic breast biopsy?
  • What does the acronym BI-RADS stand for?
  • Which is not a reason for the Lateral projection being the most common additional view?
  • What is the correct order of cellular progression of disease from benign to cancer?
  • What is the USPSTF stance on Breast Self-Examination (BSE) and Clinical Breast Examination (CBE)?
  • Which of the following substances is primarily used as a contrast agent in MRI?
  • Why is breast compression necessary during mammography?
  • What is a common misconception about mammography?
  • Ductal flow follows the radial pattern or architecture of the breast. Is this statement true or false?
  • Which breast condition may require further evaluation based on mammogram results?
  • When is it appropriate to not x-ray a breast specimen?
  • Which of the following reflects the differences in QC procedures across manufacturers?
  • What is the relationship between obesity and breast cancer risk?
  • What is the term for the dilated portion of the duct located close to the nipple?
  • At what age do ACS guidelines suggest average-risk women may discuss mammography with their doctor?
  • What is the term used when radiologists customize how mammograms are displayed on their computers?
  • What type of contrast is commonly used in breast MRI screenings?
  • What is the most desirable orientation for introducing a wire localization needle?
  • What does a screening mammogram typically involve?
  • What are digital detectors used for in digital mammograms?
  • What is the primary purpose of performing routine mammograms?
  • What is an appropriate next step if abnormalities are found in a BI-RADS 4 classification?
  • What is the importance of quality control measures in a mammography facility?
  • Which statement accurately reflects a screening recommendation for women aged 40 and older?
  • In the context of QC testing, what is meant by 'corrective action'?
  • A stiffer wire or trocar is usually more helpful to the surgeon because:
  • What does a BI-RADS 4 classification indicate?
  • Which characteristic is crucial for the interpretation of mammograms by radiologists?
  • How can the radiation dose from the combo-mode be reduced to make it comparable with a 2D exam?
  • What is the purpose of mammography screening in women over a certain age?
  • What does adjuvant therapy aim to achieve in breast cancer treatment?
  • What is a primary responsibility of a mammography technologist?
  • What is the result of taking 2D and 3D exposures with the patient under the same compression called?
  • Which of the following factors can impact breast density in mammography?
  • What are potential risks associated with mammography?
  • Where does ductal carcinoma arise within the breast?
  • Technologists should be aware thyroid shielding is:
  • Is a grid used when performing contact mammography?
  • Which of the following modalities are amenable to performing a breast needle biopsy?
  • What should a technologist do if a breast appears like "a camel's nose" on a radiographic image?
  • Does MRI detect cancers that mammography and ultrasound may miss for high-risk individuals?
  • Which of the following is NOT a desirable feature of the C-arm on mammography machines?
  • Patient-centered care requires:
  • What can patient education help reduce in the context of mammography?
  • What is an advantage of "thinking in 3D" during imaging?
  • Which factor is not associated with greater suspicion in cases of nipple discharge?
  • Which type of imaging techniques involves the use of a radio tracer or contrast agent?
  • What fibrous membranes support the lobes of the breast?
  • What does the posterior nipple line (PNL) rule evaluate?
  • In terms of operational safety, what should facilities ensure regarding mammography machines?
  • Which of the following is not a criterion the radiologist uses to evaluate calcifications?
  • How often should women aged 55 and older undergo screening mammograms?
  • What is the primary component of a mammography system used for imaging?
  • What additional imaging might be recommended after an abnormal mammogram?
  • Do digital mammography machine photo timers have to be programmed to compensate for RLF?
  • What is the key difference between screening and diagnostic mammography?
  • Which of the following is a required component of a mammogram report?
  • Which age group is most commonly affected by breast cancer?
  • What characteristic of denser breast tissue affects mammography?
  • What does the presence of microcalcifications on a mammogram suggest?
  • What are the two main types of mammography?
  • When did the mortality rate from breast cancer begin to decline after the adoption of screening mammography?
  • What is a key benefit of early detection of breast cancer through mammograms?
  • How does a breast MRI compare to a mammogram in terms of sensitivity?
  • Why is it important to adhere to safety standards in mammography?
  • Which technique is commonly used to increase image resolution in mammography?
  • What is the primary purpose of mammography?
  • What is the significance of detecting breast cancer in asymptomatic women?
  • Which of the following factors does not contribute to image quality in mammography?
  • What is the primary purpose of quality control in mammography?
  • Learning to think three-dimensionally helps the technologist in which area?
  • What maneuvers can help maximize breast tissue on a CC view?
  • In DBT imaging, what images are acquired during the movement of the X-ray tube?
  • What action is taken when QC testing data indicates that equipment is not operating within control limits?
  • Imaging a patient with a protruding abdomen provides challenges, especially in capturing the _____________ tissue.
  • What specific training is required for mammography technologists?
  • Why is patient education essential in the mammography process?
  • What should be avoided on the day of a mammogram to ensure accurate results?
  • In a facility with DBT, what must be done when a new phantom is introduced?
  • The __________ determines if chemotherapy is appropriate.
  • What is a critical responsibility of the QC technologist in the context of imaging facilities?
  • What is an effect of higher levels of estrogen produced by fat tissue?
  • What regulates mammography services in the United States?
  • What is the last phase in the cancer development process?
  • What is a limitation of standard 2D mammography in breast cancer screening?
  • To avoid any possibility of confusion, the location of an ROI should be described by:
  • When it comes to imaging patients, what action follows if QC testing reveals an issue with the equipment?
  • What are the two methods of delivering radiation therapy treatments?
  • What are the four classifications of breast tissue composition based on the ratio of fatty to glandular tissue?
  • What is the most critical aspect of storage and retrieval in an electronic environment?
  • At what age should women consider transitioning to annual screenings based on physician recommendation?
  • What does the EQUIP initiative require facilities to review?
  • Which of the following is not a component that facilitates standardization in a mammography department?
  • Is it possible to apply excessive compression to a breast during imaging?
  • When is breast cancer most treatable according to routine mammography guidelines?
  • What is the maximum risk level for breast cancer in one decade, according to ACS?
  • What is the purpose of the BrCA1 and BrCA2 blood test?
  • When should women with a family history of breast cancer consider beginning screenings?
  • Are standardized protocols for mammography dependent on whether a screening or a diagnostic exam is performed?
  • Why was the curved compression device replaced by a flat compression device in mammography positioning?
  • What is an outcome if QC testing identifies equipment is malfunctioning?
  • The primary benefit of digital mammography over analog is its capability to:
  • What is a primary responsibility of radiologists when reviewing mammograms?
  • How often are mammography facilities inspected for compliance with MQSA standards?
  • What is the meaning of "interval cancer" in breast cancer diagnosis?
  • Which conditions affect the inward and/or outward appearance of the breast?
  • What determines the direction of a rolled view?
  • What does the standard "Other Modalities Quality Control Tests" require for QC programs using digital equipment?
  • Why are all MRI units shaped like cylinders?
  • What is the role of the MQSA in mammography?
  • Why is maintaining appropriate breast thickness important during mammography?
  • What is the significance of the MLO view in mammograms?
  • Which is the most commonly utilized type of mastectomy in the United States?
  • What is the purpose of routine periodic testing performed by a QC technologist?
  • What best describes the CC and MLO projections in capturing breast tissue?
  • Which type of mammography is specifically used when there are clinical findings or symptoms?
  • Does PACS always operate at a consistent speed?
  • What percentage of breast cancer cases are attributed to genetic factors?
  • Why was hydrogen selected for use in MRI?
  • Why is the dose for a 2x magnification view approximately twice that of the standard contact image using a grid?
  • What does the term “compression” refer to in mammography?
  • What is the purpose of having QC manuals from different mammography machine manufacturers?
  • Radiologists tend to become __________ protective when interpreting digital mammograms while technologies become __________ productive.
  • How does a mammography facility demonstrate compliance with MQSA standards?
  • How is a biopsy performed if an abnormality is detected on a mammogram?
  • What is the expected outcome of following proper mammography procedures?
  • Name two additional types of quality determined by the patient: Perceived, ___________, and ____________.
  • Which committee is responsible for standardizing the digital DICOM language?
  • What is the concept of "stoke margin" in SBB?
  • What is a crucial aspect of ensuring effective mammography screening?
  • When bodily fluids contact the mammography machine, what is required?
  • What is the main goal of routine mammography in asymptomatic women?
  • What can hinder effective breast imaging in patients with certain conditions?
  • Which strategy is used to maximize breast tissue on an MLO view?
  • Detective quantum efficiency (DQE) is a measurement of image quality combined with dose. How is DQE determined?
  • What is the expected outcome of adjuvant therapy in breast cancer patients?
  • Patient preparation for the mammography exam includes the following:
  • What are the four categories of breast density as classified by the BI-RADS?
  • Which technology employs 3D imaging of the breast with isotropic imaging?
  • What is the average radiation dose from a standard mammogram?
  • Which additional view is often taken to provide clarity on complex lesions?
Subscribe

Get the latest from Examzify

You can unsubscribe at any time. Read our privacy policy